Control panel menus
47
INFORMATION
(continued)
WET AND
ACCELERATION
LONGEST
0 ... XXX HR
Longest period fixture has been wet
without a dry break since last powered on
CURRENT
0 ... XXX HR
If fixture is wet, how long since it was last
dry
TOTAL TIMES
0 ... XXX
Total number of times fixture has been wet
for longer than 90 minutes
WET SENSOR
ADC
0 ... 4095
Current value of rain sensor
ACCELERATION -
X
0 ... XXX
Base orientation at last power on, X-axis
ACCELERATION -
Y
0 ... XXX
Base orientation at last power on, Y-axis
ACCELERATION -
Z
0 ... XXX
Base orientation at last power on, Z-axis
DMX LIVE*
RATE
0 - 44 HZ
DMX transmission speed in packets per
second
QUALITY
0 - 100%
Percent of packets received
START CODE
0 - 255
Value of the DMX start code
BEAM STROBE
...
AURA P3 MIX
XXX
Scroll to see values received on each DMX
channel
TEST*
TEST ALL
BEAM DIMMER ... TILT
Run test sequence of all functions
To test a specific function, use UP/DOWN
buttons to scroll through functions. Press
ENTER to pause and press again to
restart test sequence.
Press MENU button to exit test
TEST LEDS
BEAM DIMMER ... AURA V. COLOR
WHEEL
Run test sequence of LEDs only.
Press MENU button to exit test
TEST EFFECTS
ZOOM
Run test sequence of effects.
To test a specific effect, use UP/DOWN
buttons to scroll through groups. Press
ENTER to pause and press again to
restart test sequence.
Press MENU button to exit test
TEST PAN/TILT
PAN
Run test sequence of pan functions.
Press MENU button to exit test
TILT
Run test sequence of tilt functions.
Press MENU button to exit test
MANUAL
CONTROL*
RESET
ALL
Reset fixture
BEAM STROBE / AURA P3 MIX
Scroll through effects, then manually
control an effect
Menu level 1
Menu level 2
Menu level 3
Menu level 4
Notes (Default settings in bold print)
Table 4: Control menus
