46
MAC Aura XIP User Manual
PERSONALITY
(continued)
ERROR MODE
NORMAL
Enable error messages and warnings in
display
SILENT
Disable error messages and warnings in
display (the status LED will still light to
indicate fixture status if an error has been
detected or the fixture has a warning)
HIBERNATION
MODE
ON
Enable Hibernation Mode (light output set
to zero, all effect movement disabled)
OFF
Disable Hibernation Mode
SCENE CAPTURE
RECORD
SAVE
Saves all current DMX values as playback
scene
PLAYBACK
ENABLE
Sets fixture to run currently saved
playback scene after power cycle / reset.
Any new DMX input disables scene
playback until next power cycle.
DISABLE
Disable scene playback functionality
AURA IN
COMPACT
ENABLE
Disabling allows Aura filaments to be OFF
in Compact DMX Mode, or allows Aura
filaments to follow Beam LEDs.
DISABLE
COLOR ENGINE
OUTPUT
HIGH OUTPUT
Color engine optimized for highest output
HIGH QUALITY
Color engine optimized for highest light
quality / best spectrum
AUTO EMPTY
WATER
ON
Fixture automatically dims and tilts to drain
water buildup from in front of lens when
head faces upwards and rain is detected
OFF
DEFAULT SET-
TINGS
FACTORY
DEFAULT
LOAD
ARE YOU SURE?
YES/NO
Return all settings (except calibrations) to
factory defaults
CUSTOM 1
LOAD
ARE YOU SURE?
YES/NO
Load Custom Settings 1
SAVE
ARE YOU SURE?
YES/NO
Save fixture’s current settings as Custom
Settings 1
CUSTOM 2
LOAD
ARE YOU SURE?
YES/NO
Load Custom Settings 2
SAVE
ARE YOU SURE?
YES/NO
Save fixture’s current settings as Custom
Settings 2
CUSTOM 3
LOAD
ARE YOU SURE?
YES/NO
Load Custom Settings 3
SAVE
ARE YOU SURE?
YES/NO
Save fixture’s current settings as Custom
Settings 3
INFORMATION
POWER ON TIME
TOTAL
0
...
XXX HR
Display hours fixture has been powered on
since manufacture (not user-resettable)
RESETTABLE
CLEAR
COUNTER?
YES/NO
Display hours fixture has been powered on
since last counter reset (user-resettable)
POWER ON
CYCLES
TOTAL
0
...
XXX HR
Display number of times fixture has been
powered on since manufacture
(not user-resettable)
RESETTABLE
CLEAR
COUNTER?
YES/NO
Display number of times fixture has been
powered on since last counter reset
(user-resettable)
FW VERSION*
XX.XX.XX
Displays currently active firmware version
RDM UID*
4D50.XXXXXXXX
Displays fixture’s unique RDM ID
FAN SPEEDS*
HEAD FAN
YOKE FAN
BASE FAN
0 - XXX RPM
Scroll to display current speed of each
cooling fan
TEMPERA-
TURES*
UI
PFC PCB
PAN/TILT
BEAM PIXEL
CURRENT / MIN /
MAX X C
Scroll through PCB temperature sensors,
then display current, minimum* and
maximum* temperature in °C of PCBs
*Since fixture was last reset / powered on
Menu level 1
Menu level 2
Menu level 3
Menu level 4
Notes (Default settings in bold print)
Table 4: Control menus
