background image

TERMINOLOGY  

5

ENGLISH

Terminology

Resume:

The operation of the Stop Button on

the DVD works differently from what you are
used to on CD players. On a traditional CD
 player, when you press the Stop button, the unit
does just that: it stops playback. On a CD player,
when you press the start button again, the disc
starts from the beginning. With the DVD,
 however, you have two options when playing
DVD discs. Pressing Stop once will stop play-
back, but it actually puts the unit in the Resume
mode. This means that you can turn the machine
off and, when you press play the next time, the
disc will resume or continue from the point on
the disc where the Stop button was pressed. This
is helpful if you are watching a movie and must
interrupt your viewing session but wish to pick
up where you left off. Pressing the Stop button
twice will stop the machine in a traditional
 manner and, when the disc is played again, it
will start from the beginning.

In resume mode, the cover of the DVD will be 
displayed, if available. Otherwise, the 
Harman Kardon screen will appear.

DivX

DivX is the name of a revolutionary new video
codec which is based on the MPEG-4 compres-
sion standard for video. This DVD player will
playback discs created with DivX software. The
DVD player’s playback functionalities of DivX
video discs will vary depending on the DivX soft-
ware version used for creating your movies. For
more information about the different software
versions of DivX, please go to www.divx.com.

Summary of Contents for DMC 250





































Reviews: