background image

REMOTE CONTROL  

15

ENGLISH

Remote Control 

Battery installation

Insert the batteries supplied while observing the
correct (+) and (–) polarities.

Service life of batteries

The batteries normally last for about one
year, although this depends on how often,
and for what operations, the remote control
is used.

If the remote control unit fails to work even
when it is operated near the player, replace
the batteries.

Use size “AAA” batteries.

Notes:

Do not attempt to recharge, short-circuit, 
disassemble, heat or throw the batteries into
fire.

Do not drop, step on or otherwise impact the
remote control unit. This may damage the
parts or lead to malfunction.

 

Do not mix old and new batteries.

 

Wipe away any leakage inside the remote
control unit, and install new batteries.

 

If leakage should come into contact with
parts of your body, wash it off thoroughly
with water.

Batteries contain chemical substances and
we recommend that you dispose of them
properly and in compliance with any local
regulations. Do not simply throw them away
but return to your dealer or special battery
disposal centers.

Remote control operation range

Point the remote control unit from no more than
about 7 m from the remote control sensor and
within about 60 degrees of the front of the unit.

 

The operating distance may vary according to
the brightness of the room.

Notes:

 

Do not point bright lights at the remote 
control sensor.

 

Do not place objects between the remote
control unit and the remote control sensor.

 

Do not use this remote control unit while
simultaneously operating the remote control
unit of any other equipment.

Summary of Contents for DMC 250





































Reviews: