PROGRAMMING THE REMOTE
43
ENGLISH
Programming the Remote
To program the remote for Volume Punch-
Through, follow these steps:
1. Press and hold the
Input Selector
4
for the
unit you wish to have associated with the volume
control until the red light illuminates under the
Input Selector
4
and note that the
Program
Indicator
2
will flash amber.
2. Press the
Volume Up
button
and note
that the
Program Indicator
2
will stop
flashing and stay amber.
3. Press either the
AVR Selector
5
or the
Input Selector
4
, depending on which
system’s volume control you wish to have attached
for the punch-through mode. The
Program
Indicator
2
will blink green three times and
then go out to confirm the data entry.
Example:
To have the AVR’s volume control
activated even though the remote is set to
control the TV, first press the
Video/TV Input
Selector
4
and the
Mute
button
at the
same time. Next, press the
Volume Up
button
, followed by the
AVR Input Selector
5
.
NOTE:
Should you wish to return the remote to
the original configuration after entering a Volume
Punch-Through, you will need to repeat the steps
shown above. However, press the same
Input
Selector
in steps one and three.
Channel Control Punch-Through
The AVR’s remote may be programmed to operate
so that the channel control function, performed
with the
Sleep
9
and
Surround
A
buttons,
for either the TV, cable or satellite receiver used in
your system may be used in conjunction with one
of the other devices controlled by the remote. For
example, while using and controlling the VCR,
you may wish to change channels on a cable box
or satellite receiver without having to change the
device selected by the AVR or the remote. To
program the remote for Channel Control Punch-
Through, follow these steps:
1. Press and hold the
Input Selector
button
4
for the device you wish to have the channel con-
trol associated with until the red light illuminates
under the
Input Selector
4
and the
Program
Indicator
2
flashes amber.
2. Press the
Volume Down
button
. The
Program Indicator
2
will stop flashing and
stay amber.
3. Press and release the
AVR
5
or
Input
Selector
button
4
for the device that will be
used to change the channels. The
Program
Indicator
2
will blink green three times and
then go out to confirm the data entry.
Example:
To control the channels using your TV
while the remote is set to control the VCR, first
press the
VID 1/VCR Input Selector
button
4
and the
Mute
button
at the same time.
Next, release them and press the
Volume Down
button
, followed by the same
Input
Selector
button
4
.
NOTE:
To remove the Channel Control Punch-
Through and return the remote to its original
configuration, repeat the steps shown in the
example above. However, press the same
Input
Selector
in Steps 1 and 3.
Transport Control Punch-Through
The AVR’s remote may be programmed to operate
so that the
Transport Control Functions
P
(Play, Stop, Fast Forward, Rewind, Pause and
Record) for a VCR, DVD or CD will operate in
conjunction with one of the other devices con-
trolled by the remote. For example, while using
and controlling the TV, you may wish to start or
stop your VCR or DVD without having to change
the device selected by the AVR or the remote. To
program the remote for Transport Control Punch-
Through, follow these steps:
1. Press and hold the
Input Selector
4
for
the device you wish to have the channel control
associated until the red light illuminates, under
the
Input Selector
4
and the
Program
Indicator
2
flashes amber.
2. Press the
Play
button
P
. The
Program
Indicator
2
will stop flashing and stay amber.
3. Press and release the
AVR
5
or
Input
Selector
button
4
for the device that will be
used to change the channels. The
Program
Indicator
2
will blink green three times and
then go out to confirm the data entry.
Example:
To control the transport of a CD player
while the remote is set to control the TV, press the
VID 2/TV Input Selector
button
4
and the
Mute
button
at the same time. Next, release
them and press the
Play
button
P
, followed by
the
CD Input Selector
button
4
.
NOTE:
To remove the Channel Control Punch-
Through and return the remote to its original
configuration, repeat the steps shown in the
example above. However, press the same
Input
Selector
in Steps 1 and 3.
NOTE:
Before programming the remote for
Volume, Channel or Transport Punch-Through,
make certain that any programming needed for
the specific TV, CD, DVD, Cable or Satellite
Receivers has been completed.
Resetting the Remote Memory
As you add components to your home-theater
system, occasionally you may wish to totally
reprogram the remote control without the
confusion of any commands, macros or ”Punch-
Through“ programming that you may have done.
To do this, it is possible to reset the remote to the
original factory defaults and command codes by
following these steps. Note, however, that once
the remote is reset, all commands or codes that
you have entered will be erased and will need to
be re-entered:
1. Press any of the
Input Selector
buttons
4
and the
”O“
button
H
at the same time until
the
Program Indicator
2
begins to flash
amber.
2. Press the
”3“
button
H
three times.
3. The red LED under the
Input Selector
4
will go out and the
Program Indicator
2
will
stop flashing and turn green.
4. The
Program Indicator
2
will remain
green until the remote is reset. Note that this
may take a while, depending on how many
commands are in the memory and need to be
erased.
5. When the
Program Indicator
2
goes out,
the remote has been reset to the factory settings.
30935_AVR145_ENG 01/12/06 9:53 Side 43
