HARDKERNEL ODROID-C1 User Manual Download Page 52

Page: 52 / 85

ODROID C1 USER MANUAL

sound cards typically need to be class-compliant USB MIDI devices

that do not require a device driver, and need to be used on a USB

connector that supports host mode. For some devices, the USB OTG

connection must be used with an adapter.

The MIDI Manufacturers Association webpage at

http://bit.

ly/1IzGkvb

is a good source for additional links on this topic. Oth-

er good webpages for MIDI and computer music on Android include

http://bit.ly/1FFKoUH

and

http://bit.ly/1IzGumw

TouchDAW is an excellent and mature app which allows the C1

to be a MIDI Controller for DAW and general-purpose MIDI control on

secondary workstations. TouchDAW supports the leading computer

music production applications on Windows, IOS, and Linux systems.

Using Bluetooth Devices with Android

Bluetooth device detection and pairing are very easy with An-

droid using the Settings application. After plugging in a USB bluetooth

adapter and powering up the C1, you will need to enable the bluetooth

receiver. Open the Settings application, find Bluetooth in the settings

list under the Wireless and Networks category, and select ON to en-

able your USB bluetooth adapter and bluetooth services. To begin

pairing your bluetooth device to the C1, turn on your device and put

the device into pairing mode. The Bluetooth manager will display a list

of detected devices, as well as devices that have been successfully

paired.

If your device was detected, but not shown to be a paired device,

click on the sliders icon on the right side of the listed device to open

the bluetooth settings for this device. Complete the pairing process by

entering the pairing code or passkey for the device. If the bluetooth

device was not detected, clicking on search for devices will perform a

manual scan for any detectable bluetooth devices within range of the

C1.

Adding an ODROID-VU Touchscreen

The ODROID-VU is a 10-point multitouch display that is capable

of both 720p and 1080p resolutions. To use the ODROID-VU with An-

droid, connect the USB cable from the VU to the ODROID-C1’s USB

port, then use a microHDMI to HDMI cable to connect the display.

Hardkernel’s Android images support the ODROID-VU without any ad-

ditional configuration. Use the ODROID Utility application to adjust

the resolution to a comfortable level, if necessary.

Chapter 3

Summary of Contents for ODROID-C1






















































































Search results

Summary of Contents for ODROID-C1

Reviews:

Related manuals for ODROID-C1

Brands by name

Popular brands

HARDKERNEL ODROID-C1, User Manual

Search results

Summary of Contents for ODROID-C1

Reviews:

Related manuals for ODROID-C1

Brands by name

Popular brands