Hanwha Vision SPA-C100W, User Manual

Page: 15 / 52

English _
15
!
ST
AR
T
2. When the firmware update and reboot are complete, < Progress % > is displayed until 100% and then
< Success > is displayed.
3. If you update multiple products at the same time, the update will proceed sequentially by four units at a time.
J
`
The speakers share firmware, while the microphones and servers have their own firmware.
The update will fail if inappropriate firmware is selected for the product.
In such cases, please check whether suitable firmware has been chosen for the product and restart the update.
`
The update failure status is indicated as follows:
Speaker: The status LED on the main body blinks rapidly.
Microphone: The 'Upgrading Wait' notification is displayed on the screen of the main body.
Server: The 'Upgrading Error' notification is displayed on the screen of the main body.
Registering with the product’s initial IP address
If you connect only one product to the switch hub, it is possible to set up the password even on the web
page.
1. Enter the product’s initial IP address into the web browser’s address bar.
2. The admin account password must be registered when accessing the product for the first time.
When the <
Change Password > window appears, please enter a new password.
J ` A password should contain 8 or more characters, and if it contains fewer than 9 characters, then a combination of
3 or more English uppercase/lowercase letters, numbers, or special characters must be used. If it includes 10 to 16
characters, a combination of 2 or more types must be used.
`
It is recommended not to use the same character repeatedly or consecutive keyboard inputs as passwords for enhanced
security.
3. A product login screen appears after successfully setting the password.