Hanwha Vision SPA-C100W, User Manual

Page: 27 / 52

English _
27
!
USING CONTROLLER MODE
~
Event & Preset: Select the contact closure (CP) number set in the < Event & Preset > menu to use this
menu.
- When contact closure events (up to 16) are registered in < System Setting >
➔
< All Event & Preset
List >, the contact closure number will be displayed.
- If you click the Contact Closure Number, the event broadcasting configured to the zone will be
transmitted without running [
Start Broadcasting
].
- If you click the Contact Closure Number, a musical note will be displayed on the zone device button
selected in the < Broadcasting Routing > or < Local File Play > of < Event & Preset >.
- The contact closure output signal can be turned off by turning Off the contact closure number.
- If you click the [ ] button on the right of the preset number, you can change the preset name.
M
`
As the zone with the musical note in the zone button box is broadcast even if they are not highlighted, ensure running [
End all
broadcasting ] and reconfigure it.
The zone device which can be broadcast is displayed as (Broadcasting count / Total count).
`
If the icon is displayed on the registered device, please check the network status of the device.
J
`
If you separately control <
Broadcast Server
> or <
Broadcast Client
> in the <
BGM Streaming
> menu on a speaker
selected as a source or zone while running all the broadcasts with the < Controller Mode > speaker, an error may occur
in the < Button Mode > broadcast, so please be cautious.
M
`
Even if the Controller Mode speaker is turned off during a Button Mode broadcast, the source speaker and zone speaker
work normally, so the sound source continues to play.
If the Controller Mode speaker (if set as a zone speaker) is subsequently turned on, the sound source is skipped.
`
If the source speaker is turned off during a Button Mode broadcast, all zone speakers stop broadcasting the sound source.
If the source speaker is subsequently turned on, the sound source automatically plays again from the beginning.
`
If the zone speaker is turned off during a Button Mode broadcast, only that zone speaker stops broadcasting the sound
source.
If the corresponding zone speaker is subsequently turned on, the sound source plays in synchronization with the other
speaker.
`
During a Button Mode broadcast, if the PAUSE button is pressed to pause playback or the STOP button is pressed to stop
playback, auto play does not work.
`
If you press the number which is set as Zone or Group mode on the microphone device during the broadcast of the
sound source in <
Button Mode > and run the < Talk > function, the speaker transmits the microphone’s audio instead of
broadcasting the sound source.
`
In order for the microphone to transmit the voice inputs while broadcasting, the microphone's priority must be higher than
that of the source speaker running in the <
Button Mode>
`
The speaker which transmits the microphone's audio displays the microphone’s information in the source information of
<
Property >, and it is converted to the speaker information when < TALK > is stopped in the microphone.