13
-
30
Hanskamp AgroTech B.V. (the Netherlands)
www.hanskamp.nl/en
MultiDos
EN
Dosing system –
Dosiersystem –
Systeme de dosage
-
Doseersysteem
Assembly Wallmounting
-
version
1.
Check if all the parts are present using the item list. The list of materials can be
found in the appendix
2.
Unscrew the 3 Countersunk Hexagon socket screw (art.nr. 003
-
510
-
000) at the out-
side of the MultiDos
-
pump and detach the pump.
Attention! Place the housing up to a maximum of 2 meters from the bottom of
the storage tank.
The MultiDos can be mounted on two different ways.
3a.
Attach to a wall:
Drill holes in the back of the MultiDos, as indicated in figure 28. Then secure the wall
mounting. (Mounting material is nog included)
3b.
Installed on a surface:
Drill holes in the underside of the MultiDos. The place of the holes is free
to choose, minimum distance between the tubes and the place is dis-
played in figure 27. Then secure the mounting material.( Mounting mate-
rial is not included).
25
26
28
27
Distance between the tube and
the plate: ± 8mm
