Page EN-39
Troubleshooting table
Problem
Possible cause
Solution
10 The dishes are not
dried properly.
The dishes have not been
stacked optimally.
Stack the dishes as described in the ‘Loading
the dishwasher’ section (see “Loading the
dishwasher” on page EN-17).
The rinse aid is incorrectly
dosed.
Adjust the dispensed dose (see “Changing the
rinse aid dose” on page EN-15).
The dishes were removed
too soon.
Only empty the dishes after they have been
allowed to cool.
A programme with a short
run time was selected.
Use the programme table to select a
programme with a longer run time (see
“Programme table” on page EN-21).
11 Error code
E1
The water intake is too
low.
Open the tap completely.
Remove the kink in the inlet hose.
Increase the water pressure.
Error code
E3
Required temperature not
reached.
Have the appliance examined and repaired.
Error code
E4
Water is overflowing or
leaking out.
The dishwasher is not watertight.
Close the tap.
Wipe up the leaking water.
Contact our Service Centre (see “Service” on
page EN-40).
Error code
Ed
Internal error.
Have the appliance examined and repaired.
Error code
Ec
Fault in the washing
control system.
Have the appliance examined and repaired.
