Page EN-24 Dishwasher operation
– To deactivate the option, press the
button again. The indicator will disap-
pear from the display.
Delayed start
(2)
(8)
The wash cycle normally starts as soon as
you press the “Start/Pause”
button (6).
If you want the cycle to begin later, you can
specify this. The start time can be delayed
between 1 and 24 hours.
• Press the button (2) as many times as
necessary for the display (8) to show the
delay required (
H:00
,
H:01
to
H:24
).
Starting the dishwashing
programme
(1)
(6)
(8)
(16)
1. Start the programme with the
but-
ton (6).
If you
– have not set up a start delay, the pro-
gramme cycle will begin after a few
seconds.
– have set up a delayed start, the dis-
play will initially still show the start-de-
lay duration (8); the dots between
H
and the number of hours will flash.
After the delayed start duration runs
out, the programme will start.
During the programme the display will
show the time remaining (16) ; the dots
between hour and minute numbers will
flash.
At the end of the programme cycle, an
acoustic signal will sound 8 times and the
display will show
End
.
2. Switch the dishwasher off with the but-
ton (1).
3. Turn the tap off.
4. Wait a little while before unloading the
dishwasher.
If no further settings are made, the appliance
will automatically switch off/enter standby
mode after 15 minutes.
Adding dishes
CAUTION
Risk of scalding!
Hot steam emitted when opening the
appliance door can cause scalding.
■
Maintain a sufficient distance from
the appliance door, and do not hold
your head or upper body directly
above the open appliance door.
■
Keep children and pets away from
the appliance when opening the ap-
pliance door.
■
Make sure that children do not open
the appliance door during operation.
