Page EN-14 Dishwasher detergents, rinse aids and dishwasher salts
3. Push the dispenser cover closed so that
the catch (29) clicks into place again.
Use multitabs
Many multitabs already contain dishwash-
er detergent, dishwasher salt and rinse aid,
meaning that you do not need to use these
three products separately. In this case, you
can ignore the “Add rinse aid” (10) and
“Add dishwasher salt” (12) indicators.
If your water is in the
– “soft” to “medium” hardness range, multi-
tabs will deliver good results.
– “hard” range, we would recommend that
you do not use multitabs and instead use
dishwasher detergent, dishwasher salt
and rinse aid individually.
To determine and adjust the water
hardness see page EN-35.
1. Push the closure (29) of the detergent
dispenser (22) sideways.
The cover will pop open.
2. Place a multitab in the detergent dis-
penser (22)
3. Push the dispenser cover closed so that
the catch (29) clicks into place again.
Adding rinse aid
NOTICE
Risk of damage to property!
Excessive rinse aid can lead to increased
foaming and compromise the rinsing
results.
■
Wipe away rinse aid which has over-
flowed immediately.
■
Take note of the markings for the
maximum fill quantities (“max”) in
the rinse aid dispenser.
Using unsuitable substances can cause
damage to the dishwasher.
■
Only put rinse aids which are suitable
for dishwashers into the rinse aid dis-
penser.
You do not need to add rinse aid to the
detergent compartment if you use exclu-
sively multitabs which already contain rinse
aid.
Add rinse aid:
– prior to the first use,
– when the “Add rinse aid” indicator lights
up (10).
As rinse aid is automatically dispensed during
operation, it ensures that the dishes are spot-
free and accelerates the drying process.
