Page EN-22 Dishwasher operation
Preparation
• Read chapter “Safety” from page EN-4,
particularly the safety instructions.
• Set up and connect the appliance as
described in chapter “Installation, fitting,
connection” from page EN-29.
• Refill dishwasher detergents, rinse aids
and dishwasher salts or multi-tabs.
1. Open the tap completely.
2. Close the dishwasher door.
3. Switch the dishwasher on using the
button (1).
All the lights initially light up on the
display
(8). After a short time, the pro-
gramme symbol for the ECO programme
lights up.
Protecting the environment
– The ECO programme is the most efficient
programme for cleaning normally soiled
dishes in terms of combined energy and
water consumption.
– If you keep to the maximum specified ca-
pacity when loading your appliance and
you arrange the dishes correctly, energy
and water can be saved (see “Loading the
dishwasher” on page EN-17).
– Manual pre-rinsing of the dishes leads
to higher water and energy consumption
and is not recommended.
– Cleaning dishes in your appliance gen-
erally uses less energy and water than
washing by hand, provided you follow the
instructions in the user manual.
Select the dishwashing
programme
It is recommended that you carry out a
test run before the first dishwasher cy-
cle in order to remove residues from
the manufacturing process and to ensure
that the device is fully functional. Carry out
this test run when the dishwasher is empty
and without any dishwasher detergent.
1. Select the suitable dishwashing pro-
gramme based on the “programme ta-
ble”; see page EN-21.
(1)
(5)
(16)
(17)
2. Press the
P
button (5) as often as re-
quired until the display shows the de-
sired programme indicator (17) and the
programme duration (16).
3. Dishwashing programme
– if you wish to make further adjust-
ments, continue with “Additional op-
tions”.
– if you wish to launch it, continue
with “Starting the dishwashing pro-
gramme” on page EN-24.
Dishwasher operation
