11
FINISH
LEVEL AND SQUARE FLOOR FRAME
Before installing fl oor decking, it is important to level and square the fl oor frame.
A level and square fl oor frame is required to correctly construct your shed.
BEGIN
2
3
4
1
Use level and check the frame is level before applying fl oor panels.
Check for frame squareness by measuring diagonally across corners. If the measurements are the same, the
frame is square. The diagonal measurement will be approximately 153-11/16" (390,4 cm)
.
When the frame is level and square, secure one side of frame to the 4x4 runners with one fastener at ends of each
runner. Move to the opposite end of the frame. Secure the frame to 4x4 runners with (1) fastener at ends of each
runner making sure the frame remains square
(Fig. A)
.
Once the fl oor frame is level and square fasten the frame to the 4x4 runners at each point where the frame
contacts the 4x4 runners.
See page 7 for the preferred fl oor leveling method.
First, secure
at ends with
(1) fastener.
Second, secure
at ends with
(1) fastener.
Fig. A
153-11/16"
(390,4 cm)
153-11/16"
(390,4 cm)
