50
PARTS REQUIRED:
DOOR HARDWARE
x2
3/8" BIT
(9,5 mm)
x8
1-1/4 (3,2 cm)
FINISH
Install top spring bolt to the upper end of PVC weatherstrip
(Fig. A)
. Secure with (4) 1-1/4" screws.
Mark spring bolt pin location on over door frame.
Drill a 1-1/2" deep hole using a 3/8" drill bit.
2
BEGIN
¸
1
LEFT
DOOR
Fig. B
Your spring bolts are now installed.
Fig. A
Flush
Flush
3/8" drill for bolt:
1-1/2" deep.
1-3/16"
1-3/16"
3/8" drill for bolt:
1-1/2" deep.
OVER DOOR FRAME
FLOOR
Weatherstrip
Weatherstrip
x4
Install bottom spring bolt to the lower end of PVC weatherstrip
(Fig. B)
. Secure with (4) 1-1/4" screws.
Mark spring bolt pin location on fl oor.
Drill a 1-1/2" deep hole using a 3/8" drill bit.
1-1/4" (3,2 cm)
x4
1-1/4" (3,2 cm)