12
DOO
R
Fig. A
Fig. B
PARTS REQUIRED:
x4
x1
48" x 96"
(121,9 x 243,8 cm)
2" (5,1 cm)
Flush
Flush
Flush
(2) Nails
(2) Nails
FLOOR PANELS
Install all floor panels with the painted grid lines facing up.
3/4"
(1,9 cm)
Floor panels are 5/8" (1,6 cm) thick.
Install (1)
48" x 96"
panel on the wall frame, as shown.
Use the gauge block to mark the 3/4" side measurement floor joist.
Secure panel with (2) 2" nails in the corners
(Fig. A).
2
Move to the opposite end. Using the long edge of the panel as a lever,
move the panel side-to-side until you have a 3/4" measurement on the floor joist.
Secure corner with (2) 2" nails
(Fig. B)
.
BEGIN
1
3/4" GAUGE
BLOCK
