30
TEMPORARY SUPPORT
x1
2 x 4 x 21" (5,1 x 10,2 x 53,3 cm)
SBA
PARTS REQUIRED:
RAFTERS
FINISH
Your rafters are now assembled.
Flip rafter assembly over and repeat STEP 3 to attach second gusset to other side.
Repeat STEPS 2 - 3 to build 3 additional rafter assemblies.
Secure gusset to rafters with (12) 2" nails as shown.
SET ASIDE TWO RAFTER ASSEMBLIES WITH ONLY ONE GUSSET ATTACHED.
3
2
x120
2" (5,1 cm)
Gusset
1/4"
(6,3 mm)
GAP
1/4"
(6,3 mm)
GAP
2" (5,1 cm)
Nails
(12) per side
Center
x10
6 x 24" (15,2 x 61 cm)
OSB OR WOOD GRAIN
x12
2 x 4 x 54-1/16" (5,1 x 10,2 x 137,3 cm)
WI
BEGIN
¸
1
2nd Rafter
2nd Rafter
BACK WALL
WI
SBA
TEMPORARY
SUPPORT
WI
Flush at peak
Place two rafter halves fl ush in corners of 2nd studs from back wall and fl ush to side wall panels.
Place temporary support
SBA
beneath rafters at peak.
You will build Six assemblies. (4) with two gussets, and (2) with one gusset.
96"
(243,8 cm)
Flush
Flush
