Outdoor living today 8x8 Gardener's Shed Assembly Manual Download | Manualshive

Page: 1 / 33

background image

8x8 Gardener’s Shed - Finger

Jointed Siding Assembly

Manual

Version 1.0

April 5, 2021

In the event of a missing or broken piece, simply call the Outdoor Living Today Customer
Support Line @ 1-888-658-1658 within 30 days of the delivery of your purchase. It is our
commitment to you to courier replacement parts, free of charge, within 10 business days of
this notification. Replacement parts will not be provided free of charge after the 30 day grace
period.

Some of the safety and usage measures you may wish to consider include:

-snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it is advisable to sweep the
snow off the roof(s).
-if the product is elevated, any structural and building code requirements are solely the customer's
responsibility, and should be abided by.
-in high or gusty wind conditions it is advisable to keep the structure securely grounded.
-have a regular maintenance plan to ensure screws, doors, windows and parts are tight.

Customer agrees to hold Outdoor Living Today Partnership and any Authorized Dealers free
of any liability for improper installation, maintenance and repair.

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]

Page 1

Thank you for purchasing
an 8x8 Gardener’s Shed.
Please take the time to
identify all the parts prior
to assembly.

Safety Points and Other Considerations
Our products are built for use based on
proper installation and normal residential use,
on level ground. Please follow the instruction
manual when building your shed and retain
the manual for future maintenance purposes.

1
2
3
...
»

Summary of Contents for 8x8 Gardener's Shed


































Reviews:

No comments

Related manuals for 8x8 Gardener's Shed

Brand: Karibu Pages: 36

Brand: Palmako Pages: 39

Brand: DuraMax Pages: 39

The ORGANIC GARDEN AOGC15081HC

Brand: ABSCO SHEDS Pages: 25

Brand: ABSCO SHEDS Pages: 25

85288-20760-2007

Brand: Neogard Pages: 36

Brand: E-Z FRAME Pages: 6

Brand: Karibu Pages: 89

Brand: Palmako Pages: 110

Brand: EZ Pages: 4

LUMINATO TOP 5436

Brand: telluria Pages: 79

Brand: Stjarna Pages: 14

Brand: Palmako Pages: 109

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands