Handicare MINIVATOR 2000, Installation Manual

Page: 17 / 52

MINIVATOR 2000 INSTALLATION MANUAL 17
Fitting the seat back
Fitting the seat back
Items required: Tools required:
• Seat back • 6mm ball ended Allen key
Redundant connections are present to allow
easy re-handing of seats. Connections must
be made according to the handing of the
stairlift; i.e. for a stairlift with left-hand toggle
switch and key switch (always together on
one side), those connections must be made
to left hand arm. The right arm will then
house a powered footplate switch (if fitted).
1 Place the seat back onto the seat base and
using a ball ended 6mm Allen key secure
it with the four bolts and washers provided
(Figure 41)
.
2 Make the upper seat wiring connections
as follows (Figure 42) ;
a Key switch connection:
green and orange to green and orange.
b Toggle switch: blue, white and brown
to blue, white and brown
Figure 41
Figure 42