Handicare MINIVATOR 2000, Installation Manual

Page: 19 / 52

MINIVATOR 2000 INSTALLATION MANUAL 19
Electrical connections / upholstery
Electrical connections
Items required: Tools required:
• None • None
1 Make seat and footplate electrical connections
(Figure 46) .
a Connect the power switch (2 x red).
b Connect the diagnostic display
(red, black and yellow).
c Connect the key switch loom
(orange and green).
d Connect the toggle loom
(white, blue and brown).
e Connect the seat loom earth ring terminal
(black).
f Connect the infra-red receivers on the left
and right sides of the pack (blue sleeved).
Powered footplate only
g Connect the powered footplate looms
(twin yellow and grey comms).
Power swivel only
h Connect the grey powered swivel loom.
2 Test the function of the powered features,
including the toggle (see pages 25/27) .
3 Replace and re-fit the pack front cover.
Fitting the seat upholstery
Items required: Tools required:
• Seat upholstery • Screw driver
1 Clip in the seat back, starting with the top two
clips (Figure 47) and then screw in the seat
belt cover mouldings.
2 Fit the main seat cushion.
3 Fit the seat flap cushion.
4 Fit the arm upholstery. Starting at the front,
press the upholstery into the arm recess
(Figure 48) .
Figure 46
Figure 47
Figure 48