MINIVATOR 2000 INSTALLATION MANUAL
31
Appendix 1
Maintenance
Items required:
Tools required:
• Track lubricant:
• None
Copaslip, or
Gleitmo 350
• Cleaning materials
1
Lubricate the rack with a small quantity of
lubricant:
a
Apply a small amount of petroleum jelly at
4 equally spaced points along the rack of
both the top and bottom rails
(Figure 64)
.
b
Run the lift up and down the track several
times to distribute the lubricant.
Note:
Do not use an oil based lubricant such
as WD40. It will damage the lift.
2
Check all of the safety features on the lift
as described in the Testing section of the
installation manual.
3
Check that the lift still stops as per the original
design.
4
Sit on the lift and rid e it up and down the
stairs several times:
a
Listen for any unusual noises.
b
Check for poor ride quality, especially
across the spliced joints.
5
Clean the track.
6
Clean the seat.
7
Clean the power pack.
If anything does not function correctly further
investigation and corrective action should be
undertaken.
Figure 64
Summary of Contents for MINIVATOR 2000
Page 1: ...INSTALLATION MANUAL MINIVATOR 2000 XXXXXXXX...
Page 48: ...48 MINIVATOR 2000 INSTALLATION MANUAL Appendix 5 Inside track details...
Page 49: ...MINIVATOR 2000 INSTALLATION MANUAL 49 Notes...
Page 50: ...50 MINIVATOR 2000 INSTALLATION MANUAL Notes...
