Quick Check® SV Series User’s Guide
6 - 9
~H
{hex 4}
[~HS###]SOS= 060
{This is the SOS delay value}
[c]HIGHcal= 088
{This is a CAL value}
[c]LOWcal= 004
{This is a CAL value}
[c]SCfact= 046
{This is a CAL value}
[c]min cal= 004
{This is a CAL value}
[~HB#]baud= 054
{This is the baud rate value}
[~LL]smt_decode= 535
{This enables decoders}
[~LM##]chars= 003
{Minimum number of characters}
[~LN##]num_bc= 003
{Number of barcodes per sync}
[~HQ#]output_mode= 000
{Serial Output Format}
[~HO#]oper_mode= 001
{Scanning Mode}
[~LA##]ansi= 005
{Minimum Overall grade}
[~LS##]min_scn= 002
{Number of scans per bar code}
[~LT#]sync_in= 001
{diff. Or ttl input}
[~LP#]sync_pol= 000
{Sync polarity set by this}
[~LX#]sync_typ= 001
{Env. Or Edge sync}
[~LV##]sync_md= 011
{Custom sync modes; 09 STD}
[~PO#]port_sel= 005
{ }
port_clear_md= 000
{Clears ports per read if 2}
port_time= 099
{ }
port_pol= 000
{ }
10_mil_cnts= 120
{ }
[~LD##] %dec= 070
{Percent decode}
[~PR####]PRST= 000210
{Port reset state}
[~HL#]ladder_code= 000
{Ladder mode flag}
[~HJ####]ladd_start= 0400
{Start ladder reads here}
[~HK####]ladd_end= 3500
{End ladder reads here}
[~HC####]ana_len= 2800
{Profile Sampling size}
[~HG####]ana_lenh= 1600
{Laser shutoff point}
[~HN####]pana_len= 1600
{Processing shutoff point}
[~HU####]freq= 400
{Scan Rate}
Summary of Contents for SV series
