6 - 40
Quick Check® SV Series User’s Guide
8. Port 5 will pulse active ON for an acceptable condition (absence of error
condition.)
9. Port 5 pulse time programmable (~PP801xxx). Pulses will act like a re-
triggerable 1-shot.
10. Pushing the reset button or power re-cycle will place Ports 1- 5 in their
inactive states.
11. Error conditions available are:
a. Partial Read (Programmable, ( ~Lp#, LQ#)
b. % decode (Programmable, ~LD##)
c. Bad Quiet Zone: < 10X (~PB816xxx100)
d. ANSI Defects grade (Programmable, ~PB806xxx000)
e. ANSI Decodability grade (Programmable, ~PB802xxx100)
f.
Symbol Contrast grade (Programmable, ~PB804xxx100)
g. Overall ANSI Grade (Programmable, ~LAxx)
h. No Read (if sync is received)
i.
Number of codes per sync programmable (~LN##, ~LZ##)
j.
X dimension Range (Programmable ~PB811xxxyyy)
k. Ratio (Programmable ~PB815xxx000)
l.
Symbology Mod Check data error
m. I 2 of 5 optional Mod 10 Check Digit data error (if enabled)
n. Data Match Error (~BC)
o. Increment or Decrement data error (~Br)
LED Operation
1. LED1 will turn on when Ports 1 and 2 are active due to ANSI, Symbol Con-
trast, X dimension, ratio, mod check or quiet zone error conditions.
2. LED1 will flash when Ports 1 and 2 are active due to a data increment or
decrement error condition.
3. LED2 will turn on when Ports 1 and 2 are active due to a partial, % decode or
no read error conditions.
4. LED2 will flash when Ports 1 and 2 are active due to a Data Match error
condition.
Summary of Contents for SV series
