AI-118 operation manual
issue 1 19.10.07 display version 07 . plc controller version 07
P.40 of 50
successful.
2. Tape model ST604/503/700 operation data reading of slow speed, long press
"read" for about 5 seconds, after hearing the "di" sound, the reading is
successful.
3. Schematic diagram about the position of the nozzle and the position of the upper
and lower rollers when operating the tape model of ST604/503/700, as shown in
figure 27(1) above.
4. Tape model ST104 operation data reading, long press "read" for about 5 seconds,
after hearing the "di" sound, the reading is successful.
5. Schematic diagram about the position of the nozzle and the position of the upper
and lower rollers when operating the tape model of ST104, as shown in figure
27(1) above.
6. Tape model ST306 operation data reading, long press "read" for about 5 seconds,
after hearing the "di" sound, the reading is successful.
7. Schematic diagram about the position of the nozzle and the position of the upper
and lower rollers when operating the tape model of ST306, as shown in figure
27(2) above.
8. User set data reading, long press "read" for about 5 seconds, after hearing the
"di" sound, the reading is successful, you can return to the home page to check
the parameters.
9. User operation data is written. The specific operation method is as follows: first
set the operation data, then open the memory page, press and hold the #9 write
button until you hear the “di” sound, indicating that the write is successful.
10. The data read out is the factory value and the data cannot be changed.
11. Go back to the previous page; the previous page is the “main function” page.
