AI-118 operation manual
issue 1 19.10.07 display version 07 . plc controller version 07
P.18 of 50
5. Nozzle heating on/off button (text will turn red when the heater is on).
6. When the pedal is not triggered, press the reverse button to start reversing the
rollers, release and it will stop.
It is
used to withdraw the tape or remove material
that may be stuck on the upper and lower wheels.
7. To active the cutter. Tape feed will automatic start after cutting off the tape.
8. Press this button to toggle between clamping and loosening of the clamp cylinder
，
used to adjust or wear the tape.
9. Next page button. Turn to “main function” page.
10. Adjust the speed ratio between the upper and lower rollers to create a speed
difference; the speed of upper roller is fixed.
When the set value is more than 100, the speed of lower roller is faster than the
speed of upper roller, which is used when the fabric is elastic.
When the set value is less than 100, the speed of lower roller is slower than the
speed of upper roller, which is used when the fabric is not elastic.
When the set value is 100, the speed of the lower roller is equal to the speed of
the upper roller, which is used for general conditions.
11. Roller speed display & setting button (3.3 ft
≈1
m).
12. Current time and date displayed.
