AI-118 operation manual
issue 1 19.10.07 display version 07 . plc controller version 07
P.27 of 50
4. Roller pressure low
：
Roller pressure low problem monitoring, can choose to set enable or disable. If the
setting is enabled, the machine will immediately be prohibited from working in order to
protect the components from damage when the pressure of the roller is less than a
certain value. Adjust the pressure and you can reset the alarm.
5. Heater not heating up
There will be alarm when the heater cannot heat up. If this item has problem, please
check if the heating pipe is in good condition and if the temperature display is normal.
Reset the alarm when it was modified.
6. Master alarm:
Any one of the alarm will be reflected in the master alarm. Master alarm reset button
on the right side for a button to reset all alarm items. When the alarm cannot be lifted
total, please check the alarms one by one. Reset the alarm when all of the alarms are
removed.
7. Go back to “main function page”.
