manualshive.com logo in svg

Hand Held Products Dolphin 9500, User Manual

Share
Download
Hand Held Products Dolphin 9500 User Manual Download Page 61

Dolphin® 9500 Series Mobile Computer User’s Guide

4 - 15

Adjusting the Backlight

Both the keyboard and the display are backlit to enable better viewing in low-light conditions. All keyboards contains a Backlight 
key that toggles the backlight on and off; see 

Backlight

 on page 4-10.

Keyboard

By default, the Backlight key turns the keyboard backlight on and off for both color display and 
monochrome terminals. 

Display 

Backlight functionality differs for color and monochrome displays.  

Color Display

The backlight for the color display is user-defined. There are two tabs - one for Battery and the other for External power. The 
options on each tab are the same. Go to Start > Settings > System tab > Backlight. Backlight settings open displaying the 
Battery tab.

The graphic on the right displays the default backlight 
settings for color display terminals on battery power. 

From the Turn off backlight… drop-down list, select how 
many minutes you want to elapse before the backlight 
automatically turns off.

Select the Turn on backlight… option if you want the 
display backlight to turn on when the a button is pressed 
or the touch screen is tapped.

From the Dim backlight if… drop-down list, select how 
many minutes you want to elapse before the backlight 
dims.

Move the Backlight Intensity slider to set the intensity of 
the backlight.

Tap OK to save settings.

The display backlight functions according to the settings 
saved here.

Note: The External tab contains the same options for 

external power.

Summary of Contents for Dolphin 9500



























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands