manualshive.com logo in svg

Hand Held Products Dolphin 9500, User Manual

Share
Download
Hand Held Products Dolphin 9500 User Manual Download Page 274

12 - 16

Dolphin® 9500 Series Mobile Computer User’s Guide

Wall Mounting

You can purchase a wall mount kit that contains

•           a mounting bracket,
•           three screws, and
•           six washer/nut sets. 

The back wedge of the mounting bracket contains an open slot for the power and communications cables. There is an extra 
space between this slot and the rear panel of the HomeBase to allow easy access to the power and communications ports. For 
more details on both ports, see 

Rear Panel

 on page 

12-4

.

Turn the secured 
HomeBase right 
side up.

Attach the 
bottom panel to 
the mounting 
bracket; match 
the holes to the 
secured screws.

4.

2.

Back wedge

Open slot for cords

Insert a screw into the 
round end of each screw 
slot on the bottom panel. 
Slide each screw towards 
the narrow end of the slot. 
Then, use a washer/nut set 
on each screw to secure 
the screw in the slot.

Use the remaining washer/
nut sets to secure the 
mounting brackets to the 
bottom panel.

Secure the back wedge of 
the mounting brackets to a 
stable vertical surface.

1.

3.

5.

Summary of Contents for Dolphin 9500



























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands