manualshive.com logo in svg

Hand Held Products Dolphin 9500, User Manual

Share
Download
Hand Held Products Dolphin 9500 User Manual Download Page 16

1 - 6

Dolphin® 9500 Series Mobile Computer User’s Guide

Dolphin 9500 WWAN Radio

Dolphin 9500 Series RF terminals are designed to comply with the most current applicable standards on safe levels of RF energy 
developed by the Institute of Electrical and Electronics Engineers (IEEE) and the American National Standards Institute (ANSI) 
and has been recommended for adoption by the Federal Communications Commission (FCC).

Note: The Dolphin 9500 model is the only terminal in the Dolphin 9500 Series that can be equipped with a GSM/GPRS radio for 

WWAN functionality.

GSM

The following is the required safety label that appears on the back panel of a Dolphin 9500 terminal equipped with a GSM radio: 

GSM and 802.11b

The following is the required safety label that appears on the back panel of a Dolphin 9500 terminal equipped with a GSM and 
802.11b radio combination:

GSM and Bluetooth

The following is the required safety label that appears on the back panel of a Dolphin 9500 terminal equipped with a GSM and 
Bluetooth radio combination: 

GSM, Bluetooth, and 802.11b

The following is the required safety label that appears on the back panel of a Dolphin 9500 terminal equipped with a GSM, 
Bluetooth, and 802.11b radio combination:

N10410

Tested to Comply With FCC 

S

tandards

This Class B Digital apparatus complies with 

FOR HOME OR OFFICE U

S

E

Canadian ICE

S

-003. 

Cet appariel numerique de la

Cla

ss

e B e

s

t conforme a la norme NMB-003 du Canada.

Hand Held Products, Inc.           www.hhp.com

Made in USA of US & 
imported parts.

No user serviceable parts.

Opening Voids Warranty.

0168

Canada: 1693B9505

FCC ID: HD5950005

N10410

Tested to Comply With FCC 

S

tandards

This Class B Digital apparatus complies with 

FOR HOME OR OFFICE U

S

E

Canadian ICE

S

-003. 

Cet appariel numerique de la

Cla

ss

e B e

s

t conforme a la norme NMB-003 du Canada.

Hand Held Products, Inc.           www.hhp.com

Made in USA of US & 
imported parts.

No user serviceable parts.

Opening Voids Warranty.

0168

!

Canada: 1693B9507

FCC ID: HD5950007

N10410

Tested to Comply With FCC 

S

tandards

This Class B Digital apparatus complies with 

FOR HOME OR OFFICE U

S

E

Canadian ICE

S

-003. 

Cet appariel numerique de la

Cla

ss

e B e

s

t conforme a la norme NMB-003 du Canada.

Hand Held Products, Inc.

Made in USA
of US &
imported parts.

No user
serviceable
parts.

Opening Voids
Warranty.

0168

!

Canada: 1693B9508

FCC ID: HD5950008

www.hhp.com

N10410

Tested to Comply With FCC 

S

tandards

This Class B Digital apparatus complies with 

FOR HOME OR OFFICE U

S

E

Canadian ICE

S

-003. 

Cet appariel numerique de la

Cla

ss

e B e

s

t conforme a la norme NMB-003 du Canada.

Hand Held Products, Inc.

Made in USA
of US &
imported parts.

No user
serviceable
parts.

Opening Voids
Warranty.

0168

!

Canada: 1693B9509

FCC ID: HD5950009

www.hhp.com

Summary of Contents for Dolphin 9500



























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands