Hammond A-162, Owner'S Manual

Page: 91 / 122

91
MIDI
USING A MIDI SOUND MODULE
You can control external MIDI equipment with a zone for each of the SWELL and
GREAT manuals and Pedalboard.
1. Hook up as shown above.
Connect the MIDI OUT of this organ to the MIDI IN of the equipment you want to
control.
2. Use the “MIDI Template” feature to recall “Seq. Local” (P. 94 #1).
3. Select a Preset Bank.
4. Set the Transmit Internal at OFF, and External at ON (P. 65).
By this, the transmission of the Keyboard Channel stops and the information of the Ex-
ternal Zone is sent from MIDI OUT.
Th
e ON/OFF settings of the Keyboard Channels and External Zones can be set for each
Preset Bank.
5. Set the Zone, and the data that is to be recorded to the Combination Preset, if necessary.
See “ZONES” on the next page for how to set the Zones.
MIDI Sound Module
MIN. MAX.
VOLUME IN L R L / MONO R
(KEYBOARD) (MULTI)
OUT
MICROPHONE LINE IN LINE OUT
LESLIE 11PIN
MIDI
IN 1 IN 2
LINE OUT MIDI IN
NOTE ON THE SOUNDING POINT
The External Zone sounds at a little deeper
point of the key than the Drawbar tone.
This is for outputting the velocity data to the
External Zone.