Hammond A-162, Owner'S Manual

Page: 11 / 122

11
Introduc
tion
Connect the Pedalboard
1. Place the Pedalboard on the fl oor in front of the organ.
2. Take the Pedal Cable out of the organ and insert the plug
into the connector on the Pedalboard.
3. Hold the plug with the “Retention Hook” and lock it on by
turning the screw knob.
4. Slide and push in the Pedalboard beneath the organ until
it stops.
Bench
Th e space underneath the top board of the bench is provided
for storing scores, music rack, etc.
CAUTION
Be careful not to pinch your fi ngers in the folding metal
arms when you close the lid.
Do not adjust the position of the bench while sitting.
Avoid the risk of pinching your fi ngers between the lid
and the box.
ATTENTION
Don’t tilt the bench when moving it to avoid books etc.
dropping out of the box.
Do not put anything taller than 5cm (2
˝
) into the
bench. The lid will not close and the contents may be
damaged.
Put on the Music Rack
Insert the Music Rack into the rail whenever necessary.
ATTENTION
Do not place heavy volumes or folios on the music rack.