Hammond A-162, Owner'S Manual

Page: 104 / 122

 Owner’s Manual
104
TROUBLESHOOTING

Malfunction of the buttons, the keys, etc.

Turn the POWER Switch “OFF” once, then turn it back “ON.” If this procedure is not success-
ful, turn the POWER Switch “OFF.” While touching the [RECORD] button, turn the POWER
Switch “ON” again. (Note that in this case, all parameters return to their factory-preset status.)

No sound is produced when keys are pressed and a Preset is selected.

Th e MASTER VOLUME is at the minimum setting.

Adjust the volume with the MASTER VOLUME control. (P. 12 #2)

A plug is inserted into the HEADPHONE jack.

While a plug is inserted here, the internal speakers as well as a connected Leslie Speaker are disabled.

The Foot Switch does not work.

Th e Foot Switch settings are not correct.

Reset the Foot Switch correctly in the CONTROL mode. (P. 66 #21)

The rotor of the external Leslie speaker does not stop, if the Leslie off mode
is switched to [BRAKE].

Some Leslie Speaker models do not [BRAKE]. [BRAKE] is possible on 2101/2102(mk2), 122XB,
971, 981 and 3300 (current models).

Audio is interrupted when a Preset is selected.

If you switch between Combination Presets with diff erent Custom Tone Wheel Settings, the sound
will be momentarily interrupted while the Custom Tone Wheel Settings are switched.

When you switch between Presets having diff erent Internal/External Zone settings or diff erent
PEDAL Mode settings while holding down playing keys, the audio is switched “off ,” but will sound
again when keys are pressed after selecting the new Preset.