Hammond A-162, Owner'S Manual

Page: 44 / 122

 Owner’s Manual
44
TONE
You can adjust the Tone control instantly. Th e Tone knob controls the built-in 3-band
Equalizer and traditional Tone control.
To adjust the Tone, open the lid of the control panel.
[TONE TYPE] button
Select the parameter which will be controlled by the [TONE] knob. Th e parameter
changes sequentially by touching this button;
TONE
This models the “screw-set” tone control that was present on the preamp inside of the
B-3/C-3/A-100. It gently cuts the treble.
The setting range is -9 to +9, and it becomes neutral when set at “0”.
“-1” corresponds to the maximum of the B-3/C-3/A-100 tone control, “-5”, the middle, “-9”
the minimum.
BASS
Boosts and cuts the bass range.
MID GAIN
Boosts and cuts the middle range.
TREBLE
Boosts and cuts the treble range.
[TONE] knob
Adjusts the value which is selected by [TONE TYPE] button.
While adjusting the Tone control in the PLAY mode, you will see the amount by
bar-graph for a few seconds.
Tone is at “-3”.
NOTE: You can fi ne-tune the equalizer. (P. 80)
Frequency
Gain
TC
100Hz
0dB
+3dB
-15dB
-9dB
-3dB
1kHz 10kHz
0
-1
-5
-9
+9
Frequency
Gain
1kHz
0dB
+9dB
-9dB
Bass
Gain
Treble
Gain
Middle
Gain
Middle Freq.
Tone Control
3-Band Equalizer
JUMP / STORE