Hammond A-162, Owner'S Manual

Page: 78 / 122

 Owner’s Manual
78
OD/ VIB (OverDrive / VIBrato)
In this mode, you can change the settings for Overdrive, Vibrato and Chorus.
To locate this mode:
1. From either of the PLAY screens, touch the [MENU/EXIT] button. Menu A will display.
2. Touch the [PAGE
 ] button once. Menu B will display.
3. Touch the [3] OD/VIB button.
1. Or, Touch and Hold the Vibrato & Chorus [ON SWELL] or [ON GREAT] button for a few moments.
 
OVERDRIVE
OVERDRIVE - SWITCH
Turns the Overdrive eff ect “ON” or “OFF.”
OVERDRIVE - DRIVE
Th is is for adjusting the Overdrive Value.
Th e setting range is 0 to 127. Th e higher the value, the more
distortion.
OVERDRIVE - EXPRESSION
Th is is for varying the amount of Overdrive by changing the
Expression value.
EX-OD:
If you operate the Expression pedal, not only the volume but also
the distortion will be changed.
OD-EX:
The Expression Pedal aff ects only the volume and not the distor-
tion amount.
OD ONLY:
The Expression pedal aff ects only the distortion amount and not
the volume.

VIBRATO & CHORUS
VIBRATO - RATE
Th is is for setting the Rate or Speed of the Vibrato and Chorus
eff ect.
Th
e setting range is 6.10 - 7.25 Hz.
VIBRATO - TREMOLO
Th is is for setting the Tremolo (amplitude modulation) of the
Vibrato and Chorus eff ect.
Th
e setting range is 0 - 15.
VIBRATO - EMPHASIS
Th is is for setting the Emphasis (high frequency boost) of the
Chorus eff ect (C1 / C2 / C3).
Th
e setting range is 0 - 9 dB.
MIX
Th is is for setting the balance between the vibrato and non-
vibrato tones for the Vibrato Chorus eff ect. (C1 / C2 / C3).
Th
e setting range is D64 (only the Direct tone, no vibrato
tone) - EVEN (an equal mix of vibrato and non-vibrato tone)
- 63V (only the Vibrato tone, no direct tone).
PEDAL
Select Vibrato eff ect “ON” or “OFF” for the PEDAL tones us-
ing the [VIBRATO ON GREAT] button.
VIBRATO - DEPTH V1
VIBRATO - DEPTH V2
VIBRATO - DEPTH V3
VIBRATO - DEPTH C1
VIBRATO - DEPTH C2
VIBRATO - DEPTH C3
Th ese are for setting the Depth of each Vibrato and Chorus
eff ect mode.
Th
e setting range is 0 - 15.
NOTE: The parameters in these modes are Preset Parameters and
are recorded to each Preset.