manualshive.com logo in svg

Hammond A-162, Owner'S Manual

Share
Download
Hammond A-162 Owner'S Manual Download Page 60



Owner’s Manual

60

LOCK THE DISPLAY IN PLAY MODE

Th

  is advanced feature allows you to put the organ into a special playing mode whereby the 

Control Panel is rendered inoperative. Touching any of the MENU Touch Buttons will have 
no eff ect. Th

  is is useful when you want to place the organ in public halls, churches or audi-

toriums.

To initiate the  Display Lock function, switch the power “ON” touching and hold-
ing both PARAM [

], [

] buttons and the [PLAY] button together. “

Display 

LOCKED...

” will be displayed for a few seconds. To unlock it, do the same thing as 

above. Th

  is time “

Display UNLOCKED..

” will appear for a few seconds.

NOTE:  You can record Presets, as well as use the Transpose, Tone control and Overdrive func-

tions while the Display Lock function is active.

JUMP / STORE

Touch and Hold

Summary of Contents for A-162



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands