Hammond A-162, Owner'S Manual

Page: 83 / 122

83
Setting the P
aramet
ers
SYSTEM
In this mode, you can set the System Parameters of this organ and the display information.
To locate this mode:
1. From either of the PLAY screens, touch the [MENU/EXIT] button. Menu A will display.
2. Touch the [PAGE
 ] button four times. Menu E will display.
3. Touch the [1] SYSTEM button.
PEDAL KEY - REBOUND
Th e notes played by the pedals sometimes sound twice caused by the “rebound” which
happens when the pedals are played staccato and released, depending on the tension of
the sheet spring used on it. Th
is can be avoided by adjusting the “rebound time”
Th e setting range is 1 - 128 × 1.4 milliseconds. Th e initial value is 40 × 1.4 milliseconds.
NOTE: If the rebound time is too long, it causes a sound delay.
NOTE: This is meant to be only a temporary fi x. To eliminate the problem permanently, the ten-
sion of the sheet spring or springs should be adjusted to the proper amount.
VERSION - MAIN
VERSION - INFORMATION
VERSION - D. S. P.
VERSION - BOOTSTRAP PROGRAM
VERSION - FACTORY PRESETS
VERSION - DEMONSTRATION
VERSION - KEY SCANNER
Th ese are the versions of the various software modules of the organ.
Th ese numbers cannot be changed, and are for information purposes only.