14
20V 6-1/2" CIRCULAR SAW
OPERATING INSTRUCTIONS
To attach the battery pack:
Align the raised rib on the battery pack
with the grooves in the tool, and then
slide the battery pack onto the tool.
NOTICE:
When placing the battery pack
on the tool, be sure that the raised rib on
the battery pack aligns with the groove
in the tool and that the latches snap into
place properly. Improper attachment of
the battery pack can cause damage to
internal components.
To detach the battery pack:
Depress the battery-release button,
located on the front of the battery pack, to release the battery pack. Pull the battery pack
out and remove it from the tool.
WARNING: Battery tools are always in operating condition. Therefore, remove
the battery when the tool is not in use or when carrying it at your side.
3. Trigger Switch
The lock-off button is located on the
handle above the trigger switch. It
reduces the possibility of accidental
starting for personal safety protection.
a) To turn the saw ON, press the
lock-off button, and then squeeze
the trigger switch.
WARNING:
The blade should reach
full speed before it comes into contact
with the workpiece.
b) To turn it OFF, release the trigger
switch and allow the blade to
come to a complete stop.
3
Lock-off button
Trigger switch
2
Detach
Attach
Battery - Release
Button
