4
20V 6-1/2" CIRCULAR SAW
SAFETY INFORMATION
Some of the following symbols may be used on this cordless circular saw. Please study
them and their meaning. Proper interpretation of these symbols will allow you to operate
the tool better and more safely.
SYMBOL DEFINITION
SYMBOL DEFINITION
V
V
Volts
Volts
nn
00
No-load Speed
No-load Speed
Direct current
Direct current
/min
/min
Revolutions or reciprocations
Revolutions or reciprocations
per minute (rpm)
per minute (rpm)
ØØ
Diameter
Diameter
Always wear safety goggles
Always wear safety goggles
or safety glasses with side
or safety glasses with side
shields and a full face shield
shields and a full face shield
when operating this product.
when operating this product.
A danger, warning or caution.
A danger, warning or caution.
It means ‘
It means ‘
ATTENTION! Your
ATTENTION! Your
safety is involved.
safety is involved.
’’
Read the instructions
Read the instructions
This symbol designates
This symbol designates
that this tool is listed by
that this tool is listed by
Underwriters Laboratories, to
Underwriters Laboratories, to
United States and Canadian
United States and Canadian
Standards.
Standards.
IMPORTANT:
This tool should only be serviced only by a qualified service technician.
IMPORANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS-
This manual contains important safety and operating
instructions for cordless circular saw Model HCCS200
DANGER
To reduce the risk of fire or electric shock, carefully follow these operating instructions.
General Power Tool Safety Warnings
WARNING
Read all safety warnings, instructions, illustrations and specifications provided with
this power tool.
Failure to follow all instructions listed below may result in electric shock,
fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
• Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
