20V 6-1/2" CIRCULAR SAW 15
OPERATING INSTRUCTIONS
4. Depth-of-Cut Adjustment
The depth-of-cut adjustment lever is
located beside the main handle.
a) Detach the battery pack from the
tool.
b) Loosen the depth-of-cut
adjustment lever.
c) Hold the foot of the saw flat
against the edge of the workpiece
and then raise or lower the saw
until the indicator mark on the
depth-of-cut gauge aligns with the
desired depth-of-cut mark.
d) Securely tighten the depth-of-cut
adjustment lever at the desired
depth-of-cut.
NOTICE:
Check the depth-of-cut setting.
Not more than one tooth length of the
blade should extend below the material
to be cut, for minimum splintering.
5. Bevel Adjustment
The bevel-adjustment knob adjusts the
cutting angle.
a) Detach the battery pack from the
tool.
b) Loosen the bevel-adjustment
knob by rotating the knob
counterclockwise.
c) Tilt the foot until the bevel-
indicator mark reaches the
desired setting on the bevel
gauge.
d) Securely tighten the bevel-adjustment knob by rotating the knob clockwise.
4
Depth - of - cut
Adjustment Lever
Indicator Mark
5
Bevel-adjustment
knob
Indicator mark
ONE TOOTH LENGTH
SHOULD PENETRATE
WOOD FOR MINIMUM
SPLINTERING
