20V 6-1/2" CIRCULAR SAW 13
OPERATING INSTRUCTIONS
1
2. Attaching and detaching the battery pack
WARNING: To reduce the risk of fire, personal injury, and product damage due
to a short circuit, never immerse your tool, battery pack or charger in fluid or allow
a fluid to flow inside them.
Corrosive or conductive fluids, such as seawater, certain
industrial chemicals, and bleach or bleach-containing products, etc., can cause a short
circuit.
WARNING: If any parts are damaged or missing, do not operate this product
until the parts are replaced.
Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING: Do not attempt to modify this tool or create accessories not
recommended for use with this tool.
Any such alteration or modification is misuse and
could result in a hazardous condition leading to possible serious injury.
WARNING: To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the tool when assembling parts.
This cordless drill driver must be used only with the battery packs and charger listed
below:
BATTERY PACK
CHARGER
1.5Ah
2.0Ah
4.0 Ah
13W
40W
Hammerhead
HCBT015
Hammerhead
HCBT020
Hammerhead
HCBT040
Hammerhead
HCCG013
Hammerhead
HCCG040
Lower guard
Blade shaft
Inner flange
Outer flange
Hex key
Blade
Blade bolt
