20V 6-1/2" CIRCULAR SAW 21
OPERATING INSTRUCTIONS
WARNING: Once the foot plate rests flat on the surface being cut, release
the lower guard and move the hand holding the front of the foot plate to hold the
auxiliary handle.
g) Proceed cutting in forward direction to end of cut.
WARNING: Allow blade to come to a complete stop before lifting the saw from cut.
WARNING: Never pull the saw backward, since blade will climb out of the material
and KICKBACK will occur.
h) Turn the saw around and finish the cut in the normal manner, sawing forward.
i) If corners of your plunge cut are not completely cut through, use a jigsaw or hand
saw to finish the corners.
