25
Subject to change without notice
MEMORY
oom
COMPONENT
TESTER
PROBE
ADJ
C O M B I S C O P E
CH I MENU
AC/DC/50
Ω
GND
50
Ω
/ 1 M
Ω
INVERT
ON / OFF
VARIABLE
ON / OFF
PROBE
1 : 1 / 10 / 100
CH I: 500 mV
POWER
POWER
On
Off
G e n e r a l i n f o r m a t i o n c o n c e r n i n g M E N U
General information concerning MENU
Menu and HELP displays
Whenever a pushbutton is depressed the corresponding menu
will be displayed except for: EXIT MENU/REMOTE OFF
,
ANALOG / DIGITAL
, AUTOSET
, RUN/STOP
and MAG x10
. The menus offer options which may then be selected with
the blue pushbuttons. All pushbuttons are on/off.
Exiting a menu:
1
st
The user may set a time after which the menu will be left.
(SETTINGS
pushbutton
>
, Misc
>
Menu OFF).
2
nd
Before the time set as described has elapsed a menu can
be exited by pressing EXIT MENU.
3
rd
Only manually if the function ”Man“ was selected
.
4
th
Pressing the same pushbutton again.
5
th
Pressing another pushbutton.
If a menu shows a knob symbol
this pertains to the INTENS
knob
. It allows to change settings. Also arrows may be
shown which point to available submenus.
In some modes some pushbuttons or knob operations are
meaningless and will hence not cause a menu display.
STOP
Please
note:
If a menu is shown some other information dis-
played in the readout may disappear, this will
reappear immediately upon leaving the menu.
Each menu is assisted by HELP texts, which can be called by
pressing the HELP
and which will be also displayed by the
readout. If HELP was called and the INTENS knob
moved an
explanation of the actual INTENS knob
function will be given.
HELP will be left by pressing the pushbutton again.
STOP
Please
note:
During the display of help texts and menus in full
size no signal display is possible.
Remarks
In operation all relevant measuring parameters will be shown
in the readout, provided the readout was activated and its in-
tensity is suffi cient.
The front panel LEDs add to the operating comfort and give
more information. In the end positions of the control knob an
acoustical signal will sound.
Apart from the POWER
pushbutton all control elements are
scanned and stored. This allows to control the instrument from
stored information. Some controls and menus are only operative
in DSO mode or change their meaning in this mode. Explanations
are given with the warning: ”Only in DSO mode.“
Pushbutton
Menu Title
6 Function Pushbuttons (blue)
Menu
Intensity Knop Symbol
Arrow Keys
Indicator for Submenu
State indication by intensifi ed
display
