Halstead Eden CBX, Installation And Servicing Instructions

Page: 20 / 47

18
10
11
4.3 MOUNTING THE APPLIANCE
Refer to Figure 11
a) Lift the appliance into position approximately 10 mm above the
top of the wall mounting plate and use the side wings on the plate to
locate the appliance horizontally. Then carefully lower the appliance,
ensuring that the top locating tabs are securely engaged.
b) Connect the central heating system pipes to the central heating
flow and return pipes on the boiler.
Refer to Figure 12
Commission the central heating system and domestic hot water
system, for CBX appliances as described in section 5.1, and then
proceed to Section 4.5.
MOUNTING THE APPLIANCE
12a
CBX SERVICE CONNECTIONS
WATER SERVICE CONNECTIONS
4.4 CENTRAL HEATING & DOMESTIC HOT
12b
SBX SERVICE CONNECTIONS
Pipe work may be routed from above or below the
appliance as required.
CENTRAL
HEATING
RETURN
MAINS WATER
IN & FLOW
TURBINE
GAS
SUPPLY
DOMESTIC
HOT WATER
OUT
SERVICE
CONNECTION
PIPES NOT SUPPLIED
FILLING
LOOP
DRAIN
POINT
PRESSURE
RELIEF
CONDENSATE
OUTLET
CENTRAL
HEATING
FLOW
43mm
108mm
169mm
240mm
305mm
351.5mm
411.5mm
448mm
43mm
169mm
240mm
305mm
351.5mm
411.5mm
448mm
SERVICE
CONNECTION
PIPES NOT SUPPLIED
CENTRAL
HEATING
RETURN
GAS
SUPPLY
SECONDARY
RETURN FROM
TANK
(OPTIONAL)
PRESSURE
RELIEF
CENTRAL
HEATING
FLOW
DRAIN
POINT
CONDENSATE
OUTLET