MAN1544-5
13
3
Level 1 Access
Is a read only menu that allows the operator to reset latched Ancillary Control Facility outputs (IF FITTED);
In the event an ancillary device trips out or is operated for some reason the latching control of the device
has to be reset to re-establish normal functionality of that device. Press
to reset. The LCD will display
the reset progress as seen below and then return to the Default Screen.
ACF TRIP
RESET
RESET
EXECUTE
Note:
Use Cancel at any time to step back out of the current Menu.
➢
Interrogate the panel to determine the state of selected outputs;
STATUS
➢
View any faults that may be present on the FACP.
FAULTS
Note:
Use Cancel at any time to step back out of the current Menu.
3.1
STATUS
Status allows the operator to select and view the current state/operating conditions of the active
components listed in the following sub-menu.
Press
to view the Status Menu. Press
Move Right to move through the menu or
to access
the Status sub-menus.
Note:
The sub-menu headings are in Italic.
O/Ps
Brigade
Relays
Fire Fan
Agent
Snders
I/Ps
Voltage
Software
Bell
Alarm 1
Relays 1 to 8
Fan 1 to 4
On
Sndrs 1 to 8
1 to 16
Battery volts
Version
Warn Sys
Fault
On
On
Normal
On
On
Charger volts
ACF
Isolate
Off
Off
Release
Off
Off
System Volts
ASE
Bat Fail
Isolate
Sequence
Normal
Alarm
Alarm 2
Off Fault
Fault
Note:
these screens are only available if the card, module or board is fitted to the FACP
and it is set to Yes in the System Menu
