MAN1544-5
38
LCS fault (missing or extra),
trigger zone(s) fault,
low agent pressure and interlock fault.
INTERLOCK
(Yellow)
Illuminated when the interlock input (e.g. from dampers, doors etc) is off
during the discharge sequence
–
meaning the dampers, doors etc are not closed as they should be or a fault
exists. The “Interlock” is overridden after 10 seconds and the agent is released
Note:
The Interlock is a Monitored Input and can be defaulted to the ON position by terminating the
input (TB2 7 & 8) into a 2K2
resistor.
INITIAL AGENT
(Yellow)
Illuminated when the “Initial Agent” is selected.
RESERVE AGENT
(Yellow)
Illuminated when the “Reserve Agent” is selected.
Local Control Panel Inhibit
The agent inhibit switch has an internal lamp fitted with yellow lens. Illuminated when the inhibit switch is
activated at the FACP or any of the LCS’s.
Manual Release
The ACC has provision to connect a MCP. When the MCP is activated
–
a manual release sequence of the
agent is started.
The MCP is fitted with a protective flap
–
so two actions are required to release the agent
–
lift the flap and
activate the MCP
