70
Maintenance and Service
If the Hakomatic B 1050 W is
fitted with a cab safety roof, the
trough battery can only be in-
stalled from the left-hand side
of the vehicle; the cab safety
roof is provided with a recess
(Fig. 24/4) for the lifting gear
rope.
When installing the trough
battery, use appropriate lifting
gear.
The battery may only be in-
stalled by properly trained
personnel using lifting gear.
Connect the battery plug (Fig. 24/6) and
vehicle socket (Fig. 24/5) to each other.
Ensure they are connected firmly.
5.4.5 Disposing of batteries
Used batteries with the recycling sym-
bol contain reusable commodities. The
heavy metals contained represent a
major risk both to people's health and to
the environment. Never open or dama-
ge batteries. Never touch, inhale or
swallow the content of batteries. Health
hazard! Do not allow batteries to get
into the environment. Risk of contami-
nating the ground and water!
In accordance with symbol with the
crossed out bin, these batteries must
not be disposed of in domestic waste.
Return and recycling of old batteries
must be agreed on with Hako's authori-
zed dealers in accordance with § 6 and
§ 8 BattG (Battery Law).
5.4.6 Total discharge signal trans-
ducer (TSG)
The Hakomatic B 1050 W is equipped
with a charge control for protection
against total discharge of the batteries.
The total discharge signal transducer
(TSG) is integrated in the electronic sy-
stem and setup at the factory for battery
type PzS (armor plate insulation) (digit
in the service indicator: No. 5). If other
batteries are used, the total discharge
signal transducer must be adjusted.
The total discharge signal
transducer may only be adju-
sted by an authorized Hako
service center.
Also refer to Section 3.1.8.
