76
Maintenance and Service
5.7
Rotary brush head
The rotary brush head
(Fig. 29/2) may only be assem-
bled, disassembled and adju-
sted by properly trained ser-
vice personnel.
The two rotary brushes (Fig. 29/3) are
not component parts of the delivery.
They must be selected separately ac-
cording to the task they are intended to
fulfill (refer to Section 4) and installed
according to the instructions on the ro-
tary brush head (Fig. 29/2), refer to
Section 2.3.1. Normally, however, the
authorized Hako workshop will install
them for you prior to delivery.
Before working on the rotary
brushes, switch off the rotary
brush head, turn the key switch
to Position 0 and remove the
key.
The following applies prior to
starting any maintenance work
on the rotary brush head: Open
the deflectors and move them
to their service position
(Fig. 29/1) (also refer to Sec-
tion 2.3.1, Point 1).
Fig. 29
2
3
3
1
2
