56
Maintenance and Service
5
Maintenance and
Service
General information
It is essential to pay attention
to the information in Chapter
"Safety Information" before
completing any service or
maintenance work!
By adhering to the maintenance work
recommended by us, you can be sure
that the vehicle is always ready to be
put into operation.
Maintenance and repair work necessa-
ry on a daily and weekly basis can be
carried out by a driver trained to com-
plete the work, all other Hako system
maintenance may only be completed by
personnel who are correspondingly
qualified and trained. In case of doubt,
please contact your nearest Hako ser-
vice center or authorized Hako dealer.
Failure to observe this annuls any rights
to claims under the terms of warranty in
respect of resulting damage or conse-
quential damage.
Always specify the serial number, indi-
cated on the rating plate, when making
any inquiries and orders for spare parts,
refer to Section 1.7.
5.1
Hako system maintenance
Hako system maintenance:
• ensures the Hako working vehicle is
always ready for operation (preventi-
ve maintenance),
• minimizes operating costs, mainte-
nance and repair costs,
• ensures the vehicle has a long ser-
vice life.
Hako system maintenance describes
the specific technical work necessary
for the individual modules and defines
the intervals for the maintenance tasks.
Individual parts which must be changed
during maintenance tasks are defined
and stipulated in spare parts kits.
Hako system maintenance,
customer:
Work to be carried out by the customer
according to the service and mainte-
nance instructions in the operating ma-
nual (daily and weekly). Operating
personnel are given the necessary in-
struction by specialists when the vehic-
le is delivered.
Hako system maintenance I:
(Every 250 operating hours)
Must be completed by a skilled techni-
cian in an authorized Hako service cen-
ter according to the vehicle-specific
system maintenance with a spare parts
kit.
Hako system maintenance II:
(Every 500 operating hours)
Must be completed by a skilled techni-
cian in an authorized Hako service cen-
ter according to the vehicle-specific
system maintenance with a spare parts
kit.
Hako system maintenance III/S:
(Every 1000 operating hours
safety check)
Must be completed by a skilled techni-
cian in an authorized Hako service cen-
ter according to the vehicle-specific
system maintenance with a spare parts
kit. All the legally prescribed safety-rele-
vant tests must be completed in accor-
dance with UVV-BGV-TÜV-VDE.
