Hakko Electronics V Series, Connection Manual

Page: 188 / 332

Appendix 1 PLC2Way
App1-3
PLCs Compatible with PLC2Way Connection at MJ Port
•
When connecting the V7 series to the PLC at the MJ port using PLC2Way function, use the
RS-232C or RS-485 (RS-422) 2-wire connection. The PLC that allows RS-485 (RS-422) (4-wire)
connection only cannot be connected directly.
•
PLCs compatible with PLC2Way connection at MJ port as of February, 2004 are shown below.
MITSUBISHI
OMRON
SHARP
YOKOGAWA
Fuji Electric
MATSUSHITA
For the applicable PLCs, refer to “PLC2Way” under “Available PLCs” in “Chapter 2” to “Chapter
33.” ( : Connectable : Not connectable)
•
The communication parameter setting and available memory for the PLC connected at the MJ port
for PLC2Way connection are the same as those for 1 : 1 connection. Refer to the communication
setting and the available memory for each manufacturer in “Chapter 2” to “Chapter 33.”