![HAI lumina Quick Start Installation Manual Download Page 8](http://html1.mh-extra.com/html/hai/lumina/lumina_quick-start-installation-manual_3219169008.webp)
Page 6
SETUP
The Setup menu is used to configure the system and to give text descriptions to all of the HLC lighting devices. To enter the Setup
menu, from the top-level display or from the main menu, press the 9 (SETUP) key on the numeric keypad.
Upon entry to the Setup mode, you will first be prompted to enter a valid code:
SET UP
ENTER
CODE:
Use the default code to enter the Setup mode (the default code is 1 1 1 1):
SET UP
1=CODES 2=TIME 3=PROG
4=DIAL 5=AREA 6=MISC
7=NAMES 8=VOICE
Set the Time and Date
To set up time and date, from the Setup menu, press the 2 (TIME) key. You will be prompted to enter the new time and date.
AM/PM must be specified for the time if that format is being used, otherwise the entered time should be 13:00-23:59.
TIME:
HHMM
=AM
=PM
DAYLIGHT
SAVINGS
TIME?
0=NO
1=YES
If Daylight Savings Time is currently being observed (between spring and fall), set this item to "Yes". If Daylight Savings Time is not
currently being observed (between fall and spring) or is not observed in your geographic location, set this item to "No". This item is
used to correctly calculate the times for sunrise and sunset. Once the time is set, the Lumina controller will automatically adjust the
"time of day" each time daylight savings time begins and ends.
Next you are prompted to enter the date. If the current date is February 8, 2006, enter it as “0 2 0 8 0 6”.
ENTER
DATE:
MMDDYY
Assign a Name to HLC Lighting Devices
Before naming HLC Dimmers, Switches, and 6-Button Room Controllers, you should have thoroughly reviewed Appendix A
“Understanding HLC” and have completed the worksheet(s) in Appendix B “HLC Planner”.
You should assign a name to the following HLC devices:
Name the Room Controllers that resides on the 1
st
unit in each Room (i.e. Unit 1, 9, 17, 25, etc.)
Name all of the Lighting Loads (Dimmers and Switches) in each Room
You should not assign a name to the following HLC devices:
Do not name Room Controllers that reside between the 2
nd
and 7
th
unit in a Room
Do not name House Controllers that reside on the 8
th
unit in a Room